Příspěvků: 5
• Stránka 1 z 1
Problém s .BSP souborem
Ahoj, potřeboval bych poradit s kompilací mapy. Když dám F9, tak mi v průběhu kompilace vyskočí tato tabulka vždy 2x http://www.imgup.cz/image/dUB a chybí mi soubor .BSP ...nevím co s tím, před tím jsem s tím problém neměl. Díky 

-
MarkoOo - Amatér
- Příspěvky: 50
- Registrován: 23 led 2013, 21:05
Problém s .BSP souborem
A uz jsi vyzkousel treba tohle? 

-
Rumcajz - Patriot
- Příspěvky: 97323
- Registrován: sob 29.led 1999 0:11:22
Re: Problém s .BSP souborem
Pro vyreseni je potreba, aby jsi zkopitoval ten kompilacni log.
Dole pod nim stiskni Copy to Clipboard a pak to vloz sem jako Quote.
PS: jeste nez to sem budes postovat, tak si procti Bezne chyby pri kompilaci
PPS: omlouvam se za pozdni odpoved, mel jsem to napsane, ale zapomenul jsem to odeslat
Dole pod nim stiskni Copy to Clipboard a pak to vloz sem jako Quote.
PS: jeste nez to sem budes postovat, tak si procti Bezne chyby pri kompilaci
PPS: omlouvam se za pozdni odpoved, mel jsem to napsane, ale zapomenul jsem to odeslat
Miluju rozmanitost života. Každý den mě někdo nasere novým způsobem.
-
Abit - Kazatelův učeň
- Příspěvky: 383
- Registrován: 08 říj 2014, 17:03
Re: Problém s .BSP souborem
Je tam napsané, že mám chybně nastavené cesty, ale proč mi to do teď šlo bez chyb, když jsem ani z ničím nehýbal?
** Executing...
** Command: Change Directory
** Parameters: "C:\Program Files\CS"
** Executing...
** Command: C:\PROGRA~1\hammer\hlcsg.exe
** Parameters: "c:\program files\hammer\maps\m_power_v1"
hlcsg v3.4 Final (Feb 25 2006)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to ([email protected])
----- BEGIN hlcsg -----
Command line: C:\PROGRA~1\hammer\hlcsg.exe "c:\program files\hammer\maps\m_power_v1"
Entering c:\program files\hammer\maps\m_power_v1.map
Current hlcsg Settings
Name | Setting | Default
---------------------|-----------|-------------------------
threads [ 6 ] [ Varies ]
verbose [ off ] [ off ]
log [ on ] [ on ]
developer [ 0 ] [ 0 ]
chart [ off ] [ off ]
estimate [ off ] [ off ]
max texture memory [ 4194304 ] [ 4194304 ]
max lighting memory [ 6291456 ] [ 6291456 ]
priority [ Normal ] [ Normal ]
noclip [ off ] [ off ]
null texture stripping[ on ] [ on ]
clipnode economy mode [ on ] [ on ]
clip hull type [ legacy ] [ legacy ]
onlyents [ off ] [ off ]
wadtextures [ on ] [ on ]
skyclip [ on ] [ on ]
hullfile [ None ] [ None ]
nullfile [ None ] [ None ]
min surface area [ 0.500 ] [ 0.500 ]
brush union threshold [ 0.000 ] [ 0.000 ]
Using mapfile wad configuration
Wadinclude list :
[zhlt.wad]
0 brushes (totalling 0 sides) discarded from clipping hulls
CreateBrush:
10%...Error: Entity 0, Brush 4: outside world(+/-4096): (4544,-512,-512)-(4608,2944,768)
Error: brush outside world
Description: The map has a problem which must be fixed
Howto Fix: Check the file http://www.zhlt.info/common-mapping-problems.html for a detailed explanation of this problem
Error: Entity 0, Brush 4: outside world(+/-4096): (4528,-528,-548)-(4624,2960,804)
Error: Entity 0, Brush 4: outside world(+/-4096): (4512,-544,-544)-(4640,2976,800)
Error: Entity 0, Brush 4: outside world(+/-4096): (4528,-528,-530)-(4624,2960,786)
20%...30%...40%...50%...60%...70%...80%...90%... (0.02 seconds)
----- END hlcsg -----
** Executing...
** Command: C:\PROGRA~1\hammer\hlbsp.exe
** Parameters: "c:\program files\hammer\maps\m_power_v1"
hlbsp v3.4 Final (Feb 25 2006)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to ([email protected])
----- BEGIN hlbsp -----
Command line: C:\PROGRA~1\hammer\hlbsp.exe "c:\program files\hammer\maps\m_power_v1"
>> There was a problem compiling the map.
>> Check the file c:\program files\hammer\maps\m_power_v1.log for the cause.
----- END hlbsp -----
** Executing...
** Command: C:\PROGRA~1\hammer\hlvis.exe
** Parameters: "c:\program files\hammer\maps\m_power_v1"
hlvis v3.4 Final (Feb 25 2006)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to ([email protected])
----- BEGIN hlvis -----
Command line: C:\PROGRA~1\hammer\hlvis.exe "c:\program files\hammer\maps\m_power_v1"
>> There was a problem compiling the map.
>> Check the file c:\program files\hammer\maps\m_power_v1.log for the cause.
----- END hlvis -----
** Executing...
** Command: C:\PROGRA~1\hammer\hlrad.exe
** Parameters: "c:\program files\hammer\maps\m_power_v1"
hlrad v3.4 Final (Feb 25 2006)
Zoner's Half-Life Compilation Tools -- Custom Build
Based on code modifications by Sean 'Zoner' Cavanaugh
Based on Valve's version, modified with permission.
Submit detailed bug reports to ([email protected])
----- BEGIN hlrad -----
Command line: C:\PROGRA~1\hammer\hlrad.exe "c:\program files\hammer\maps\m_power_v1"
>> There was a problem compiling the map.
>> Check the file c:\program files\hammer\maps\m_power_v1.log for the cause.
----- END hlrad -----
** Executing...
** Command: Copy File
** Parameters: "c:\program files\hammer\maps\m_power_v1.bsp" "C:\Program Files\CS\cstrike\maps\m_power_v1.bsp"
The command failed. Windows reported the error:
"Systém nemůže nalézt uvedený soubor."
** Executing...
** Command: Copy File
** Parameters: "c:\program files\hammer\maps\m_power_v1.pts" "C:\Program Files\CS\cstrike\maps\m_power_v1.pts"
The command failed. Windows reported the error:
"Systém nemůže nalézt uvedený soubor."
** Executing...
** Command: C:\PROGRA~1\CS\hl.exe
** Parameters: +map "m_power_v1" -game cstrike -dev -console +deathmatch 1
-
MarkoOo - Amatér
- Příspěvky: 50
- Registrován: 23 led 2013, 21:05
Re: Problém s .BSP souborem
nevim kde jsi vzal nastaveni cest
Error: Entity 0, Brush 4: outside world(+/-4096): (4528,-528,-548)-(4624,2960,804)
Miluju rozmanitost života. Každý den mě někdo nasere novým způsobem.
-
Abit - Kazatelův učeň
- Příspěvky: 383
- Registrován: 08 říj 2014, 17:03
Re: Problém s .BSP souborem
Aha, toho brushe jsem si ani nevšiml...díky za pomoc a můžete to locknout.
-
MarkoOo - Amatér
- Příspěvky: 50
- Registrován: 23 led 2013, 21:05
Příspěvků: 5
• Stránka 1 z 1
Kdo je online
Uživatelé procházející toto fórum: Žádní registrovaní uživatelé a 0 návštevníků